EVGA

Silverfish v3 Miner – Fan Mod

The v3 Silverfish was the quietest Silver fish they did, mainly due to the fact they decided to enclose the unit in a tube of sorts. This created the first “nice” looking miner on the market but still not quiet enough for the wife to allow one in the front room/lounge One of the best features of the Silverfish and this is something I have yet to come across again, if the miner got to hot it would automatically reduce the clock speed. This meant that a variable fan could be fitted to reduce fan speed and noise but intern […]

img_3664

BTC over $6000 & LTC over $60

It’s crazy prices for BTC at the moment and shouts of MOON in trade channels, private WhatsApp channels and forums it hard to know when we will reach the Moon. Lots of Analysts are predicting $10k within the year and €100k with in 10 years. So is a BTC of $1mill so far out of reach? Will it stop there? Will we see LTC at €1000? It will be a long road but we need to keep mining, keep trading and using the coins, that’s when they become truely valuable HODLing is not always the key

Gridseed G-Blade – Hashra’s Blade Controla

Amazing piece of Raspberry Pi software that came as an open source IMG download that was copied onto a SD card then loaded into the Pi. Came in a couple of flavours that I have personally used Mini Controla Used for the 5-chip gold heat sink units and supported the dual mining and multi-pool fail over. Support for multiple miners via USB daisy chain, watch out for low power USB hubs as these can create issues. Blade Controla This is for the G-Blade miners with more features like better pool stats but essentially the same design. Using the wrong miner with wrong Controla […]

/

6x Radeon 6970 GPU Open Air Mining Case

I set out to make serous miner with 6x Radeon 6970. Up until now I have only built SLI rigs in standard cases so this required some additional planning. I searched eBay etc and there is nothing commercially available to buy to hold 6 cards. Its time to build my own.   Shopping List 6x Radeon 6970 Reference Cards 2x EVGA 1300w PSU 1x ASRock H81 Pro BTC motherboard 4GB RAM 120GB 2.5″ Hard Drive PCI-e Extension cables Aluminuim angle bars 1″ wood Small self tapping screws Item required for the Build Screw Driver Tape Measure Aluminium angle strips 1″ […]

The Kraken – CA

[col grid=”3-2 first”] [map address=”Yonge St. and Eglinton Ave, Toronto, Ontario, Canada” width=100% height=600px] [/col] [col grid=”3-1″] Direction We are located at Aliquam faucibus turpis at libero consectetur euismod. Nam nunc lectus, congue non egestas quis, condimentum ut arcu. Nulla placerat, tortor non egestas rutrum, mi turpis adipiscing dui, et mollis turpis tortor vel orci. Cras a fringilla nunc. Suspendisse volutpat, eros congue scelerisque iaculis, magna odio sodales dui, vitae vulputate elit metus ac arcu. Address 123 Street Name, City, Province 23446 Phone 236-298-2828 Hours Mon – Fri : 11:00am – 10:00pm Sat : 11:00am – 2:00pm Sun : 12:00am […]

«‹ 7 8 9 10